-What is PermaTile Roofing?
PermaTile Roofing is a metal roofing product, which resembles the look of Mediterranean clay tile. It weighs 1/10th the weight of traditional concrete tile. The roofing panels are made from 26g galvanized steel with an Akzo Nobel brand paint system called. Trinar®... The Trinar® Cool Chemistry coating has a 35 year warranty and is Energy Star approved.
PermaTile roofing has many advantages. For example, the roofs are low maintenance, environmentally friendly, fire resistant, pest resistant, decay resistant and can withstand severe weather and high wind gust. Also! Due to the use of ENERGY STAR efficient paints and coatings , permatile roofing saves the most energy as a result of high solar reflectance and superior ability to cool quickly at night. Tile shaped roofing PermaTile, also creates an air space between the metal and the roof decking which works as an insulator to your roof.
PermaTile is very tough and durable. Whether its the sun, rail, severe winds, or even fire, this roofing protects your building from above from whatever Mother Nature can throw its way. In cases of excessive wind, PermaTile has been shown in manufacturing testing to withstand up to 150 mph winds when installed properly. PermaTile has been approved for use in the HVHZ (High Velocity Hurricane Zone) areas such as Broward, Miami-Dade and Monroe counties.
Permatile offers you the look of tile with all the advantages of steel metal.
The features include:
Energy Savings- Permatile features special infrared reflective coatings that meet Energy Star requirements.
This helps to reduce the amount of heat absorbed into a structure and can lower energy
consumption by up to 40% as compared to conventional roofing materials.
Lightweight- Permatile panels are less than 1/10th the weight of traditional concrete tiles and 1/3rd the
weight of asphalt singles.
Durable- The 26 guage galvanized steel panels are manufactured to withstand severe weather and
the elements superior to other types of roofing.
Longrun- Continuous panels run vertically from eave to ridge and are cut to exact lengths needed.
Wind Uplift- Panels are fastened with special screws fitted with EPDM washers to ensure waterproof
seal. This system has been laboratory tested to withstand up to 150 mph winds or 254 PSF
under uniform static uplift loads. NOW APPROVED FOR HVHZ HURRICANE ZONES.
Maintenance- Mold and mildew are virtually eliminated since the metal does not retain water like concrete
tile or asphalt shingles. Simply wash with a soft brush and mild detergent if needed.
Color Selection- Permatile roofing panels are available in a wide variety of colors to best accentuate your
Florida Product Approval # 1763.2
Our low gloss permatile steel roof are produced from tension leveled. extra smooth G-90 hot dipped galvanized with aluminum. The Trinar® performance coatings which contain fluoropolymer resin (Kynar 500® or Hylar 5000®) and long lasting pigmentation for the most durable finishes available for metal roofing components. Trinar® coatings are warranted by Akzo Nobel against fading, chalking, peeling and cracking for thirty five years.
We strives to accurately reproduce the screen images of the shingle , siding and color shown above. However, due to manufacturing variances, the limitations of monitor resolution and the variation in natural exterior lighting, actual colors and granule blends may vary a little bit from the images you see. For this reason, it is necessary to see a roofing, siding sample in our location before making a final color selection.
18005 S. Dixie Hwy, fl 33157
We also accept
Checks By Mail or do
Transaction over the phone.